Slabline DeSoto Epoxy FlooringSlabline DeSoto Epoxy Flooring

Flooring Contractor in Cedar Hill, TX - Coatings on Properly Prepared Concrete

Slabline DeSoto Epoxy Flooring is a flooring contractor based in DeSoto, TX that coats, polishes and seals concrete in Cedar Hill, from garages and pool decks to shop and warehouse floors.

Glossy metallic epoxy floor with swirling gray and black patterns beneath dining tables and chairs.

Cedar Hill floors as we see them on the job

Cedar Hill shares a city line with DeSoto and Duncanville, so it's one of the closest places we work. Homeowners here call us mostly about garage floors in single-family homes, and local businesses call about shop and storefront floors. We also get calls about patios and pool decks. The neighborhoods run from established streets, where a house may have had a few owners, to newer subdivisions with two- and three-car garages.

Older homes often have a garage floor that's been painted, patched or sealed over the years, while newer ones usually have bare concrete that nobody has touched. That history shapes the job more than anything else, because it decides how much stripping and grinding we do before a coating goes on.

What Cedar Hill slabs need before a coating

Concrete in Cedar Hill isn't very different from ours in DeSoto, but the lots and garages here bring a few things I look for on every visit.

  • Cedar Hill sits on the northern edge of the Balcones Escarpment, where the Hill Country starts, so we see more sloped lots than in flatter cities.

  • A garage slab is usually poured with a slight fall toward the door so water runs out, and we keep it when we coat.

  • Oil, tire marks and road grime soak into bare garage concrete, so we degrease the slab and grind them out before any coating goes down.

  • Hairline cracks and chipped joints get filled and ground flush first, because a thin coating shows every flaw underneath it.

The size of the floor, the repairs it needs and the system you choose set both the price and the schedule, so I come out and measure before I write your estimate.

Working in Cedar Hill from our base in DeSoto

We're based in DeSoto and come to Cedar Hill for garage, patio and shop floors, and we do the same work in Duncanville and Midlothian. If your city isn't on the list below, please ask.

Flooring services for Cedar Hill homes and businesses

Get a free written floor estimate in Cedar Hill

Please send the form or call, and we'll reply within one business day to set a time. I'll come out to your Cedar Hill property, look at the floor and measure it myself, and you'll get a free written estimate with no obligation.

Hours
Mon–Fri: 6 AM–10 PM, Sat–Sun: 7 AM–11 PM

Why Cedar Hill customers hire our crew

I learned this work beside my father and started this business in DeSoto in 2023. Here is what you can expect when we take on your floor.

  • Preparation comes before coating

    My father taught me a floor is only as good as the concrete under it, so we grind, repair and clean first. I'd rather turn down a job than put a coating where it won't hold.

  • I measure and run the job

    I come out to look at your floor and measure it myself. The work is done by our own small crew, and I'm on site running it from start to finish.

  • Licensed, insured and guaranteed

    We're licensed and insured, and our work is backed by our satisfaction guarantee. Please call (972) 450-9481 or use our estimate form to tell us about your Cedar Hill floor.

Cedar Hill floor coating questions we hear

Do I need a permit for an epoxy garage floor in Cedar Hill?

The city's permit list doesn't answer that directly, so I check with Cedar Hill's Building Inspections office before I quote. The city requires permits for construction, alterations and repairs to a building, while painting, cabinets and similar finish work need none. If your job does need one, we pull it ourselves and plan the work around the city's inspections.

Can a homeowner get their own building permit in Cedar Hill?

Yes, the city will issue a permit to a homeowner for permitted work if you own the home and live in it. When a contractor does permitted work instead, the city requires them to be registered with Cedar Hill, which is separate from a general business license, so it's a fair thing to ask.

How do I request a building inspection in Cedar Hill?

For work under an issued permit, you send the request to the city before 4:00 pm the day before the inspection day you want. On jobs where we hold the permit, we make those requests and plan our days around them.

Do I need a permit to resurface a pool deck in Cedar Hill?

The city requires a permit for pools and spas more than 24 inches deep, but its list doesn't spell out resurfacing the deck around an existing pool. I ask the Building Inspections office before quoting, and if a permit is needed, we handle it the same way as any other.

What causes epoxy to peel off a garage floor?

Peeling usually comes from poor preparation, because epoxy rolled onto smooth, dirty or previously sealed concrete has nothing to grip. Oil soaked into the slab and moisture coming up through it can also push a coating loose. That's why we grind and check the floor before we coat, and I'll tell you plainly if a slab isn't ready.

How much does a garage floor coating cost in Cedar Hill?

The price depends mostly on the size of the floor, the shape the concrete is in and the coating system you choose. Cracks to fill, old paint or sealer to strip and moisture problems all add work, while a sound slab and a simple solid color keep it lower. Once I've measured, you'll have a written estimate for your floor.

Call about your Cedar Hill floor today

Our hours run until 10 PM on weekdays and 11 PM on weekends, so you can call (972) 450-9481 after work or send the form whenever it suits you.

Mon–Fri: 6 AM–10 PM, Sat–Sun: 7 AM–11 PM

(972) 450-9481Request an estimate